Bose 1600-VI Manuel de service télécharger pdf (Page 5)

Size: 3.5"H (2U) x 19"W x 13.25"D

89mm x 483mm x 337mm

Weight: Net: 33 lbs. (15 kg)

Shipping weight: 39 lbs. (17.7 kg)

Display: 7 LED indicators per channel

1 green - READY, 5 yellow - SIGNAL,

1 red - CLIP/PROTECT

Operating Temperature: 0° to 50° C, up to 85% RH

Performance Specifications

Continuous Average Output Power,

both channels driven: 450 Watts per channel into 8 Ohms from

20 Hz to 20 kHz, with no more than 0.2% THD

600 Watts per channel into 4 Ohms from

20 Hz to 20 kHz, with no more than 0.2% THD

Bridged Mono Operation: 1400 Watts into 8 Ohms from 20 Hz to 20 kHz,

with no more than 0.2% THD

Voltage Output: 60 V line voltage per channel into 8 Ohms

49 V line voltage per channel into 4 Ohms

Dynamic Headroom: 1.0 dB nominal

Power Bandwidth: 5 Hz to 40 kHz (+0, -3 dB)

Frequency Response: 20 Hz to 20 kHz (±0.75 dB)

Channel Separation: > 65 dB @ 1 kHz; > 55 dB @ 10 kHz

Damping Factor: > 170

Input Impedance: 25k Ohms unbalanced, each leg to ground,

50k Ohms balanced

*Sensitivity: High: .775 Vrms for rated power into 4 Ohms @

1 kHz, 57 mVrms for 1W into 4 Ohms @ 1 kHz

Low: 1.5 Vrms for rated power into 4 Ohms @ 1 kHz,

116 mVrms for 1W into 4 Ohms @ 1 kHz

*Gain: High: 36.0 dB (±0.5 dB)

Low: 30.3 dB (±0.5 dB)

1800VI SPECIFICATIONS

*The amplifier sensitivity is set to 0.775V rms for rated output. To reduce the sensitivity by 6 dB to

1.5V rms, remove JP100 (CH1) and JP200 (CH2), located on the main amplifier board.

1 2 3 4 5 6 7 8 9 10 ... 59 60

Pas de commentaire

Bose 1600-VI Manuel de service Page 5