Bose ControlSpace Guide de l'utilisateur télécharger pdf (Page 84)

Bose

ControlSpace

™

Designer

™

Software User Guide

74 Chapter 4: Store system programming

Recalling parameter sets

The Recall buttons in the Parameter Sets window are change to orange

when a parameter set is stored. Pressing recall changes the state of all

specified signal processing blocks to the values stored in the parameter

set. You can open the individual signal processing block control panels

and then recall parameter sets to verify that you have stored the correct

settings.

Clearing parameter sets

To clear the contents of a parameter set, right click on the top level of the

tree structure, and select Clear, or press Delete.

Figure 4.23 - Clear a parameter set

Presets

Presets are a snapshot of the state of the entire system including all

signal processing blocks, CC-64 and CC-16 programming. Presets are

also the only way to dynamically change the programming of the CC-64

and CC-16 controllers. Because presets are “global” settings, meaning

they affect every setting of every device, you should only use them if you

want to initialize or change the state of the entire system, or if you need to

change how a CC-64 or CC-16 is programmed.

Note: Presets can only be invoked by a General Purpose Input (GPI) or a

timer. Presets cannot be invoked by a CC-64 or CC-16.

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 220 221

Pas de commentaire

Modely	Typ Dokumentu
BP24100	Instalační příručka Reflectix BP24100 Installation Guide, 1 stránky
EXP04050	Instalační příručka Reflectix EXP04050 Installation Guide, 1 stránky
RB4812550	Instalační příručka Reflectix RB4812550 Installation Guide, 1 stránky

Bose ControlSpace Guide de l'utilisateur Page 84